FlubRC 1/18th H-Series Long Bed 155+ (Bed Only)

⚠️ 📢 H-Series (FV3) Now Available

Thank you for your support over the years. We are the original pioneers of micro hard body kits, and it all started with the V1 H-Seires 8 years ago as Carothers Custom Prints. We are stoked to announce our Final Version of the Scale Performance H-Seires.

The H-Series FV3 has been completely redrawn. We've paid close attention to the original body lines, scale details, and gave it our iconic, performance based, Pinched and Doved Koffin Shape! The body will take up to 64mm tires, has a perfect approach and departure, and a few new Mag Topper options to choose from. The Standard and 4R Mag Toppers have made a comeback since the V1. We've added the new Open Topper as a lightweight option that allows you to showcase your scale goodies in the bed. We've also brought the Mag Halo up from the E-Series with some new styling, and the ToolBox is now a Mag Topper option aswell. The FV3 parts are not designed to work with the previous H-Series Versions.

The Bed will come with the tail lens, and 4 magnets for mounting the topper options.

For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets.

CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat.

When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!

Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved.

***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC